; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

; =============================================================================
; GEMEINSAME BASIS - wird von allen Environments geerbt
; =============================================================================
[env]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
monitor_speed = 115200
monitor_echo = yes
monitor_filters = esp32_exception_decoder, default
board_build.partitions = min_spiffs.csv
build_flags =
    -DCORE_DEBUG_LEVEL=1       ; 0=keine, 1=Fehler, 3=Info, 5=Verbose
    -DARDUINO_LOOP_STACK_SIZE=8192
    -DELEGANTOTA_USE_ASYNC_WEBSERVER=1
    -DFIRMWARE_VERSION='"1.0.1"' ; Semantic Versioning – hier erhöhen bei neuem Release
lib_deps =
    majicDesigns/MD_Parola @ ^3.7.3
    majicDesigns/MD_MAX72XX @ ^3.5.1
    knolleary/PubSubClient @ ^2.8
    tzapu/WiFiManager @ ^2.0.17
    https://github.com/me-no-dev/AsyncTCP.git
    https://github.com/me-no-dev/ESPAsyncWebServer.git
    bblanchon/ArduinoJson @ ^7.3.0
    https://github.com/ayushsharma82/ElegantOTA.git

; =============================================================================
; HAUPT-ENVIRONMENT - USB Flash & Monitor
; pio run -e az-delivery-devkit-v4 --target upload
; =============================================================================
[env:az-delivery-devkit-v4]
upload_port = COM3

; =============================================================================
; OTA ENVIRONMENT – Firmware via WiFi flashen (ArduinoOTA / espota)
; Erscheint in Arduino IDE als Netzwerk-Port: lasercutter-display.local
; PlatformIO: pio run -e az-delivery-devkit-v4-ota --target upload
; IP anpassen:  upload_port = <IP des ESP32>  (oder lasercutter-display.local)
;
; Falls ein Web-Passwort gesetzt ist, muss es hier eingetragen werden:
;   upload_flags = --auth=DEIN_WEBPASSWORT
; Oder als Umgebungsvariable (empfohlen, damit das Passwort nicht im Repo landet):
;   Vor dem Upload: set LASERCUTTER_OTA_PW=DEIN_PASSWORT (Windows)
;   upload_flags = --auth=${sysenv.LASERCUTTER_OTA_PW}
; =============================================================================
[env:az-delivery-devkit-v4-ota]
upload_port = 192.168.2.62
upload_protocol = espota
; upload_flags = --auth=DEIN_WEBPASSWORT   ; <-- auskommentieren und anpassen wenn Passwort gesetzt

; =============================================================================
; OTA ENVIRONMENT (HTTP) – Firmware via ElegantOTA Webinterface
; Nur als Fallback falls ArduinoOTA nicht erreichbar
; pio run -e az-delivery-devkit-v4-ota-http --target upload
; =============================================================================
[env:az-delivery-devkit-v4-ota-http]
upload_port = 192.168.2.62
upload_protocol = custom
extra_scripts = upload_ota.py

; =============================================================================
; TEST ENVIRONMENT 1.4 – Dot-Matrix-Display Verdrahtungstest
; Flash: pio run -e test-display --target upload
; =============================================================================
[env:test-display]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_display.cpp>
; SPI auf 1 MHz reduzieren: robuster bei 8 verketteten Modulen / langen Leitungen
build_flags =
    -DMAX_SPI_CLOCK_SPEED=1000000L
    -Wno-cpp   ; unterdrückt "INFO: ARDUINO SPI interface selected"-Warning aus MD_MAX72XX
lib_deps =
    majicDesigns/MD_Parola @ ^3.7.3
    majicDesigns/MD_MAX72XX @ ^3.5.1

; =============================================================================
; TEST ENVIRONMENT 1.5 – Push Button / Potentialfreier Schalter Verdrahtungstest
; Flash: pio run -e test-button --target upload
; =============================================================================
[env:test-button]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_button.cpp>

; =============================================================================
; TEST ENVIRONMENT 2.2 – NVS Persistenz-Verifizierung
; Flash: pio run -e test-nvs --target upload
; Monitor: pio device monitor -e test-nvs
; =============================================================================
[env:test-nvs]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_nvs.cpp> +<../src/settings.cpp>
; MD_MAX72XX wird nur wegen config.h -> DISPLAY_HW_TYPE benötigt
lib_deps =
    majicDesigns/MD_MAX72XX @ ^3.5.1

; =============================================================================
; TEST ENVIRONMENT 3.3 – WiFiManager Verbindungstest
; Flash: pio run -e test-wifi --target upload
; Monitor: pio device monitor -e test-wifi
; Credentials löschen: BOOT-Taste (GPIO 0) beim Start 3 s gedrückt halten
; =============================================================================
[env:test-wifi]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter = -<*> +<../test_sketches/test_wifi.cpp> +<../src/wifi_connector.cpp>
build_flags =
    -DCORE_DEBUG_LEVEL=1
lib_deps =
    tzapu/WiFiManager @ ^2.0.17
    majicDesigns/MD_MAX72XX @ ^3.5.1

; =============================================================================
; TEST ENVIRONMENT 5.6 – LaserTracker Verifikation
; Flash: pio run -e test-laser-tracker --target upload
; Monitor: pio device monitor -e test-laser-tracker
; Button (GPIO 4) druecken = Laser aktiv simulieren
; BOOT-Taste (GPIO 0) 3s halten = Gesamtzeit loeschen
; =============================================================================
[env:test-laser-tracker]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_laser_tracker.cpp> +<../src/display_manager.cpp> +<../src/settings.cpp> +<../src/laser_tracker.cpp>
build_flags =
    -DCORE_DEBUG_LEVEL=1
    -Wno-cpp
lib_deps =
    majicDesigns/MD_MAX72XX @ ^3.5.1

; =============================================================================
; TEST ENVIRONMENT 4.3 – DisplayManager Verifikation
; Flash: pio run -e test-display-mgr --target upload
; Monitor: pio device monitor -e test-display-mgr
; =============================================================================
[env:test-display-mgr]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_display_manager.cpp> +<../src/display_manager.cpp>
build_flags =
    -DCORE_DEBUG_LEVEL=1
    -Wno-cpp
lib_deps =
    majicDesigns/MD_MAX72XX @ ^3.5.1

; =============================================================================
; TEST ENVIRONMENT 6.5 – MqttClient Verifikation
; Flash:   pio run -e test-mqtt --target upload
; Monitor: pio device monitor -e test-mqtt
;
; Verifikation:
;   - MQTT Explorer -> broker.hivemq.com:1883
;   - Subscribe: lasercutter/#
;   - lasercutter/status erscheint beim Connect (retained) und alle 60s
;   - lasercutter/session erscheint nach Laser-AUS (GPIO 4 loslassen)
;   - Publish lasercutter/reset Payload "1" -> Gesamtzeit wird geloescht
;   - BOOT-Taste 3s halten -> lokaler Reset
; =============================================================================
[env:test-mqtt]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter = -<*> +<../test_sketches/test_mqtt_client.cpp> +<../src/settings.cpp> +<../src/display_manager.cpp> +<../src/laser_tracker.cpp> +<../src/wifi_connector.cpp> +<../src/mqtt_client.cpp>
build_flags =
    -DCORE_DEBUG_LEVEL=1
    -Wno-cpp
lib_deps =
    majicDesigns/MD_MAX72XX @ ^3.5.1
    knolleary/PubSubClient @ ^2.8
    tzapu/WiFiManager @ ^2.0.17
    bblanchon/ArduinoJson @ ^7.3.0

; =============================================================================
; TEST ENVIRONMENT 7.7 – WebServer Verifikation
; Flash:   pio run -e test-web --target upload
; Monitor: pio device monitor -e test-web
;
; Verifikation:
;   - IP-Adresse aus Serial Monitor ablesen
;   - Browser: http://<IP>/        -> Statusseite
;   - Browser: http://<IP>/config  -> Konfigurationsformular
;   - Browser: http://<IP>/update  -> ElegantOTA
;   - Gesamtzeit-Reset-Button testen
;   - Konfiguration aendern + nach Neustart pruefen
; =============================================================================
[env:test-web]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter =
    -<*>
    +<../test_sketches/test_web_server.cpp>
    +<../src/settings.cpp>
    +<../src/display_manager.cpp>
    +<../src/laser_tracker.cpp>
    +<../src/wifi_connector.cpp>
    +<../src/mqtt_client.cpp>
    +<../src/web_server.cpp>
build_flags =
    -DCORE_DEBUG_LEVEL=1
    -Wno-cpp
    -DASYNC_TCP_SSL_ENABLED=0
    -DELEGANTOTA_USE_ASYNC_WEBSERVER=1
lib_deps =
    majicDesigns/MD_MAX72XX @ ^3.5.1
    knolleary/PubSubClient @ ^2.8
    tzapu/WiFiManager @ ^2.0.17
    bblanchon/ArduinoJson @ ^7.3.0
    https://github.com/me-no-dev/AsyncTCP.git
    https://github.com/me-no-dev/ESPAsyncWebServer.git
    https://github.com/ayushsharma82/ElegantOTA.git