matthias.lotz/MQTT-Display-LaserCutter
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
974616aee2
MQTT-Display-LaserCutter/platformio.ini

227 lines
8.0 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[env:az-delivery-devkit-v4]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
; Upload & Monitor
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
monitor_filters = esp32_exception_decoder, default
; Partitionsschema: min_spiffs gibt mehr Platz für OTA (2x ~1.8 MB App)
board_build.partitions = min_spiffs.csv
; Build-Flags
build_flags =
-DCORE_DEBUG_LEVEL=1 ; 0=keine, 1=Fehler, 3=Info, 5=Verbose
-DARDUINO_LOOP_STACK_SIZE=8192
-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
; Bibliotheken
lib_deps =
majicDesigns/MD_Parola @ ^3.7.3
majicDesigns/MD_MAX72XX @ ^3.5.1
knolleary/PubSubClient @ ^2.8
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/AsyncTCP.git
https://github.com/me-no-dev/ESPAsyncWebServer.git
bblanchon/ArduinoJson @ ^7.3.0
https://github.com/ayushsharma82/ElegantOTA.git
; =============================================================================
; TEST ENVIRONMENT 1.4 – Dot-Matrix-Display Verdrahtungstest
; Flash: pio run -e test-display --target upload
; =============================================================================
[env:test-display]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_display.cpp>
; SPI auf 1 MHz reduzieren: robuster bei 8 verketteten Modulen / langen Leitungen
build_flags =
-DMAX_SPI_CLOCK_SPEED=1000000L
-Wno-cpp ; unterdrückt "INFO: ARDUINO SPI interface selected"-Warning aus MD_MAX72XX
lib_deps =
majicDesigns/MD_Parola @ ^3.7.3
majicDesigns/MD_MAX72XX @ ^3.5.1
; =============================================================================
; TEST ENVIRONMENT 1.5 – Push Button / Potentialfreier Schalter Verdrahtungstest
; Flash: pio run -e test-button --target upload
; =============================================================================
[env:test-button]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_button.cpp>
; =============================================================================
; TEST ENVIRONMENT 2.2 – NVS Persistenz-Verifizierung
; Flash: pio run -e test-nvs --target upload
; Monitor: pio device monitor -e test-nvs
; =============================================================================
[env:test-nvs]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_nvs.cpp> +<../src/settings.cpp>
; MD_MAX72XX wird nur wegen config.h -> DISPLAY_HW_TYPE benötigt
lib_deps =
majicDesigns/MD_MAX72XX @ ^3.5.1
; =============================================================================
; TEST ENVIRONMENT 3.3 – WiFiManager Verbindungstest
; Flash: pio run -e test-wifi --target upload
; Monitor: pio device monitor -e test-wifi
; Credentials löschen: BOOT-Taste (GPIO 0) beim Start 3 s gedrückt halten
; =============================================================================
[env:test-wifi]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter = -<*> +<../test_sketches/test_wifi.cpp> +<../src/wifi_connector.cpp>
build_flags =
-DCORE_DEBUG_LEVEL=1
lib_deps =
tzapu/WiFiManager @ ^2.0.17
majicDesigns/MD_MAX72XX @ ^3.5.1
; =============================================================================
; TEST ENVIRONMENT 5.6 – LaserTracker Verifikation
; Flash: pio run -e test-laser-tracker --target upload
; Monitor: pio device monitor -e test-laser-tracker
; Button (GPIO 4) druecken = Laser aktiv simulieren
; BOOT-Taste (GPIO 0) 3s halten = Gesamtzeit loeschen
; =============================================================================
[env:test-laser-tracker]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_laser_tracker.cpp> +<../src/display_manager.cpp> +<../src/settings.cpp> +<../src/laser_tracker.cpp>
build_flags =
-DCORE_DEBUG_LEVEL=1
-Wno-cpp
lib_deps =
majicDesigns/MD_MAX72XX @ ^3.5.1
; =============================================================================
; TEST ENVIRONMENT 4.3 – DisplayManager Verifikation
; Flash: pio run -e test-display-mgr --target upload
; Monitor: pio device monitor -e test-display-mgr
; =============================================================================
[env:test-display-mgr]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
build_src_filter = -<*> +<../test_sketches/test_display_manager.cpp> +<../src/display_manager.cpp>
build_flags =
-DCORE_DEBUG_LEVEL=1
-Wno-cpp
lib_deps =
majicDesigns/MD_MAX72XX @ ^3.5.1
; =============================================================================
; TEST ENVIRONMENT 6.5 – MqttClient Verifikation
; Flash: pio run -e test-mqtt --target upload
; Monitor: pio device monitor -e test-mqtt
;
; Verifikation:
; - MQTT Explorer -> broker.hivemq.com:1883
; - Subscribe: lasercutter/#
; - lasercutter/status erscheint beim Connect (retained) und alle 60s
; - lasercutter/session erscheint nach Laser-AUS (GPIO 4 loslassen)
; - Publish lasercutter/reset Payload "1" -> Gesamtzeit wird geloescht
; - BOOT-Taste 3s halten -> lokaler Reset
; =============================================================================
[env:test-mqtt]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter = -<*> +<../test_sketches/test_mqtt_client.cpp> +<../src/settings.cpp> +<../src/display_manager.cpp> +<../src/laser_tracker.cpp> +<../src/wifi_connector.cpp> +<../src/mqtt_client.cpp>
build_flags =
-DCORE_DEBUG_LEVEL=1
-Wno-cpp
lib_deps =
majicDesigns/MD_MAX72XX @ ^3.5.1
knolleary/PubSubClient @ ^2.8
tzapu/WiFiManager @ ^2.0.17
bblanchon/ArduinoJson @ ^7.3.0
; =============================================================================
; TEST ENVIRONMENT 7.7 – WebServer Verifikation
; Flash: pio run -e test-web --target upload
; Monitor: pio device monitor -e test-web
;
; Verifikation:
; - IP-Adresse aus Serial Monitor ablesen
; - Browser: http://<IP>/ -> Statusseite
; - Browser: http://<IP>/config -> Konfigurationsformular
; - Browser: http://<IP>/update -> ElegantOTA
; - Gesamtzeit-Reset-Button testen
; - Konfiguration aendern + nach Neustart pruefen
; =============================================================================
[env:test-web]
platform = espressif32
board = az-delivery-devkit-v4
framework = arduino
upload_port = COM3
monitor_speed = 115200
monitor_echo = yes
board_build.partitions = min_spiffs.csv
build_src_filter =
-<*>
+<../test_sketches/test_web_server.cpp>
+<../src/settings.cpp>
+<../src/display_manager.cpp>
+<../src/laser_tracker.cpp>
+<../src/wifi_connector.cpp>
+<../src/mqtt_client.cpp>
+<../src/web_server.cpp>
build_flags =
-DCORE_DEBUG_LEVEL=1
-Wno-cpp
-DASYNC_TCP_SSL_ENABLED=0
-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
lib_deps =
majicDesigns/MD_MAX72XX @ ^3.5.1
knolleary/PubSubClient @ ^2.8
tzapu/WiFiManager @ ^2.0.17
bblanchon/ArduinoJson @ ^7.3.0
https://github.com/me-no-dev/AsyncTCP.git
https://github.com/me-no-dev/ESPAsyncWebServer.git
https://github.com/ayushsharma82/ElegantOTA.git
Reference in New Issue View Git Blame Copy Permalink